基于HHT的航空直流串行电弧特征提取方法

由于飞机内部布线空间有限、电弧故障存在发生时间地点随机以及特征不明显等问题，导致检测困难。本文基于航空270 V高压直流（HVDC）系统开展直流串行电弧故障特征提取方法研究，采用希尔伯特黄变换（HHT）提取电弧电流交流分量的时域和频域特征量。选择HHT的固有模态函数IMF5瞬时幅值的峰峰值和标准差作为识别电弧故障的时域特征，与原始信号中提取的时域特征量对比，正常和电弧特征量的区分度更大；选择HHT的固有模态函数IMF1+IMF2、一定频带范围内的瞬时幅值计算得到的谐波功率和作为区分正常和电弧情况的频域特征量。与常用的快速傅里叶变换（FFT）方法相比，HHT三维时频谱能够反映信号的局部特征，HHT方法计算得到的正常和电弧特征量之间的区分度更大，电弧和正常特征量的比值最高可达346。基于HHT的电弧故障特征提取方法能够更好地区分正常和电弧情况，有助于提高电弧故障的检测率，降低虚警率，具有重要的工程应用价值。     

eLoran系统ASF网格应用算法研究

ASF网格是提高增强型罗兰（Enhanced Long Range Navigation，eLoran）系统精度的重要方法。根据所在网格四个顶点的附加二次时延（Added Secondary Factor，ASF）值通过网格应用算法得到待测试点的ASF值，一定程度上比公式计算的ASF值更准确。在计算过程中，用户四个顶点ASF值的测量误差会传递给用户，同时内插算法本身也会引入误差，此时内插算法的选择尤为重要。本文通过仿真、分析比较几种常用的内插算法，得出结论：反距离插值算法引入的误差最大，双线应插值算法引入的误差最小，而且误差呈现一定层次感，网格从内到外误差逐渐减小。     

面向立方星的相对位姿测量视觉传感器设计

针对立方星在轨服务任务中的近距离相对导航问题，提出一种相对位姿测量视觉传感器设计。为应对空间复杂的光照条件，设计一种具有多层结构的立体靶标，选取波长为850nm的LED灯作为立体靶标的光源。在相机镜头处安装850nm的红外窄带滤镜以提高立体靶标成像质量。为提高视觉传感器的测量精度，提出一种迭代直接求解(iterative direct solution, IDS)的相对位姿估计算法。该算法直接利用立体靶标上的非共面点提供的深度信息获得初始相对位姿，然后引入Haralick迭代算法来优化初始测量结果。搭建六自由度实验平台对该视觉传感器进行性能测试。实验结果表明,该视觉传感器能克服背景光的干扰，且提出的 IDS相对位姿估计算法的精度优于经典的P3P算法和EPnP算法。     

Validation of non-linear split window algorithm for land surface temperature estimation using Sentinel-3 satellite imagery: Case study; Tehran Province,Iran

In recent years, land surface temperature (LST) has become critical in environmental studies and earth science. Remote sensing technology enables spatiotemporal monitoring of this parameter on large scales. This parameter can be estimated by satellite images with at least one thermal band. Sentinel-3 SLSTR data provide LST products with a spatial resolution of 1 km. In this research, direct and indirect validation procedures were employed to evaluate the Sentinel-3 SLSTR LST products over the study area in different seasons from 2018 to 2019. The validation method was based on the absolute (direct) evaluation of this product with field data and comparison (indirect) evaluation with the MODIS LST product and the estimated LST using the non-linear split-window (NSW) algorithm. Also, two emissivity estimation methods, (1) NDVI thresholding method (NDVI-THM) and (2) classification-based emissivity method (CBEM), were used to estimate the LST using the NSW method according to the two thermal bands of Sentinel-3 images. Then, the accuracy of these methods in estimating LST was evaluated using field data and temporal changes of vegetation, which the NDVI-THM method generated better results. For indirect evaluation between the Sentinel-3 LST product, MODIS LST product, and LST estimated using NSW, four filters based on spatial and temporal separates between pairs of pixels and pixel quality were used to ensure the accuracy and consistency of the compared pairs of a pixel. In general, the accuracy results of the LST products of MODIS and Sentinel-3, and LST estimated using NSW showed a similar trend for LST changes during the seasons. With respect to the two absolute and comparative validations for the Sentinel-3 LST products, summer with the highest values of bias (?1.24 K), standard deviation (StDv = 2.66 K), and RMSE (2.43 K), and winter with the lowest ones (bias of 0.14 K, StDv of 1.13 K, and RMSE of 1.12 K) provided the worst and best results for the seasons in the period of 2018–2019, respectively. According to both absolute and comparative evaluation results, the Sentinel-3 SLSTR LST products provided reliable results for all seasons on a large temporal and spatial scale over our studied area.     

适用于CEI的GEO卫星相时延解算方法及试验

为解决在实际航天任务中利用连线干涉测量(CEI)技术进行高精度GEO卫星定轨以及共位GEO卫星相对定位时面临的载波相位整周模糊度难题，提出了一种基于卫星下行信号的多弧段融合相位模糊度解算方法，它通过相邻多弧段载波相位值和窄带信号群时延值的融合处理可精确获得无模糊载波相时延观测量。对提出的方法进行了性能仿真和实际外场试验验证，结果表明：在20 km基线上，利用北斗GEO卫星的伪码测距信号和天链卫星的测控信号均成功实现了S频段解载波整周相位模糊，相时延测量精度优于0.1ns，对应GEO卫星定轨精度优于54 m。该方法在国内首次实现了在几十km基线量级上利用几百kHz窄带测控信号获得无模糊载波相时延，具有较好的工程应用前景。     

结合跳点引导的无人机随机搜索避撞决策方法

针对无人机在城市空域环境和密集交通流下的避撞决策问题，提出马尔科夫决策过程（MDP）和蒙特卡洛树搜索（MCTS）算法对该问题进行建模求解。蒙特卡洛树搜索算法在求解过程中为保证实时性而使其搜索深度受限，容易陷入局部最优，导致在含有静态障碍的场景中无法实现避撞的同时保证全局航迹最优。因此结合跳点搜索算法在全局规划上的优势，建立离散路径点引导无人机并改进奖励函数来权衡飞行路线，在进行动态避撞的同时实现对静态障碍的全局避撞。经过多个实验场景仿真，其结果表明改进后的算法均能在不同场景中获得更好的性能表现。特别是在凹形限飞区空域仿真模型中，改进后的算法相对于原始的蒙特卡洛树搜索算法，其冲突概率降低了36%并且飞行时间缩短47.8%。     

Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer (FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multi-quadrotor system is separated into two subsystems: the outer-loop cooperative subsystem and the inner-loop attitude subsystem. In the outer-loop subsystem, with the estimation of disturbing forces and uncertain dynamics from FTCESOs, an adaptive consensus theory based cooperative controller is exploited to ensure the multiple quadrotors form and maintain a time-varying pattern relying only on the positions of the neighboring aircrafts. In the inner-loop subsystem, the desired attitude generated by the cooperative control law is stably tracked under a FTCESO-based attitude controller in a finite time. Based on a detailed algorithm to specify the cooperative control protocol, the feasibility condition to achieve the time-varying anti-disturbance formation tracking is derived and the rigorous analysis of the whole closed-loop multi-quadrotor system is given. Some numerical examples are conducted to intuitively demonstrate the effectiveness and the improvements of the proposed control framework.     

W波段UAV MISAR实时成像运动补偿方法

建立了实时成像正侧视合成孔径雷达(SAR)运动误差模型,采用了一种基于惯导和相位梯度自聚焦(PGA)运动误差估计的中心波束平面运动补偿算法。该算法对回波包络和相位进行分开补偿,利用惯导数据把带有运动误差的回波包络拉直,再利用相位梯度自聚焦算法对回波进行相位误差估计并补偿。针对实时成像的时间少、运算量大、运算资源受限等特点,该算法取消了距离徙动校正的步骤,将运动误差矢量在斜距平面投影并完成包络校正和相位误差估计。该方法运算量小,同时能满足分辨率要求。仿真结果表明:该方法能够得到质量较高的SAR图像。     

DME询问信号捕获的设计与实现

捕获询问信号是DME地面设备的一个重要功能组成部分。现役的地面设备中大多使用的捕获单元为分离器件电路设计，其电路复杂，控制难度大，改进与维护成本高。针对这些问题，本文设计采用ADC结合FPGA作为主要功能器件，并通过软件算法完成数字滤波、脉冲峰值提取和半幅点计算，实现询问信号的识别与捕获。不仅大幅减少元器件的使用，缩小设备体积，还可提高扩展性与可靠性。结合机柜验证测试，结果符合设计要求。     

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题，提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先，将飞行器模型化为严反馈形式，以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅，并保证限幅信号的可导性，限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰，设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明，本文方法能够在满足攻角约束基础上保证良好跟踪性能。